manual:chapter7:custmenu

The menu engine in newRPL retains the basic concepts of the one used in userRPL but provides new features such as help messages and dynamic menu appearance.

The most important command used to display a custom menu is TMENU which displays the menu on the active menu area. It accepts either an integer or a list: the former is used to display a preset system menu but here we will discuss about the latter, which allows to display a fully customized menu.

The menu is structured as a list of items, where each item defines a softkey:

{
  Item_1
  ...
  Item_n
}

If more than 6 items exist, the menu will be split in pages of 5 softkeys each, and the rightmost softkey of each page will turn into a NXT… key to display a new page; as usual, pressing any shift and NXT… will display the previous page.

Each item can be a single object or a three elements list: in the first case the offect depends on the type of the object:

  • an identifier or a directory will have all the properties of an entry in the Vars menu;
  • a unit with the numerical part equal to 1 will have all the properties of an entry in the Units menu;
  • a command will work as expected and will display an help message (if any) when long-pressed;
  • a string will be displayed without quotes and returned on the stack whenthe softkey is pressed. No help is displayed when long-pressed;
  • any other object will be XEQ'ted when the softkey is pressed. The label on the key is created decompiling the object for display. No help is displayed when long-pressed.

In the second case, each element of the list takes care of an aspect of the softkey:

{
  <Display>
  <Action>
  <Help>
}

The DISPLAY object

The <Display> object can be either a single object or a two elements list; if it is a single object:

  • a program leaving 1 object on the stack is XEQ'ted and its output is used as label;
  • a graphic object will be displayed as-is;
  • a string will be displayed without quotes;
  • a unit with the numerical part equal to 1 will be stripped of the numerical part and the _ delimiter and displayed;
  • any other object will be decompiled for display and shown on the label.

If <Display> object is a two elements list:

{
  <Display>
  <Decoration>
}

the <Display> part works exactly as above while the <Decoration> part is an integer interpreted as a binary number:

  • if bit 0 is set, the label will be shown with its first character shaded, as directories or top-level menus;
  • if bit 1 is set, the color of the label will be inverted: the final effect cumulates with the effect of flags -15 and -16;
  • other bits are ignored.

The ACTION object

The <Action> object is optional and can be either a single object, a three or a five elements list; if it is a single object:

  • A command or operator will be XEQ'ted or its name will be inserted in the editor if the command line is active;
  • an identifier or a directory will have all the properties of an entry in the Vars menu;
  • a unit will have all the properties of an entry in the Units menu;
  • any other object will be XEQ'ted.

and all these actions will happen whether the softkey is pressed unshifted, shifted or hold-shifted.

If the <Action> object is a three elements list:

{
  <Normal_Action>
  <Left-Shift_Action>
  <Right-Shift_Action>
}

the user can define three separate actions for unshifted and shifted softkeys.

If the <Action> object is a five elements list:

{
  <Normal_Action>
  <Left-Shift_Action>
  <Right-Shift_Action>
  <Left-Shift-Hold_Action>
  <Right-Shift-Hold_Action>
}

the user can define five separate actions for unshifted, shifted and hold-shifted softkeys.


The HELP object

The <Help> object is an optional string that will be displayed in the help area when the softkey is long-pressed; a line break can be inserted using the RS-DOT key combination in Alpha mode.


newRPL has two menu areas available to the user which can be exploited to create a multilevel menu structure. Since newRPL allows the user to choose either MENU 1 or MENU 2 as active area, it is more convenient to refer to the two menus not in absolute terms but in chronological terms; in other words, three commands are available to display a custom menu:

  • the already mentioned TMENU which displays the menu on the active menu area as controlled by flag -11;
  • TMENULST which displays the menu on the area that was used last, be it the active or the secondary area;
  • TMENUOTHR which displays the menu on the area that was not used last, be it the active or the secondary area.

In this way an application can easily create a multilevel menu hierarchy and have both levels displayed on the screen at once. Of course, such a structure must be traversed also backwards, therefore three suitable commands are provided:

  • MENUBK which displays the previous menu on the active menu area;
  • MENUBKLST which displays the previous menu on the area that was used last;
  • MENUBKOTHR which displays the previous menu on the area that was not used last.

Finally, to retrieve on the stack the definitions of the custom menus the following commands are provided:


The following programs build a 3-levels menu: the resulting program is just an empty shell, but demonstrates effectively the following techniques:

  • menu concatenation;
  • use of decorations;
  • folding and unfolding of third level menu in the secondary area;
  • works correctly whether the active area is in MENU 1 or MENU 2.

Program L1The top level menu

{ 
  { { "File" 1 } :: L2 TMENULST ; "File operations" }
  { { "Edit" 0 } :: ; "Edit file" }
  { { "Search" 0 } :: ; "Search text" }
  { "" }
  { "" }
  { { "Quit" 0 } :: #00040000h TMENUOTHR #04402000h TMENU ; "Quit application" }
}
  • The File menu recalls the second level menu, which will be displayed in the same area occupied by the top level menu;
  • Edit and Search are dummy entries;
  • filler softkeys have neither <Action> nor <Help> object;
  • Quit restores MAIN and Vars menus.

—-

Program L2The second level menu

{ 
  { { "New" 0 } :: ; "Create new file" }
  { { "Open" 0 } :: ; "Open existing file" }
  { { "Save" 1 } :: L3 TMENUOTHR ; "Save file" }
  { "" }
  { "" }
  { "Back" :: { } TMENUOTHR MENUBKLST ; "Back to Main menu" }
}
  • Save opens the third level menu in the other area, leaving the second level menu still on the screen;
  • Back cleans any third level menu that could have been displayed and restores the top level menu in the same area.

Program L3The third level menu

{ 
  { "Save" :: ; "Save file" }
  { "As..." :: ; "Save with another name" }
  { "Copy" :: ; "Save a duplicate" }
  { "" }
  { "" }
  { "Back" :: { } TMENULST MENUBKOTHR ; "Back to Main menu" }
}
  • Back clears the third level menu and restores the previous menu in the other area which incidentally is the top level menu.

Program MAINPutting everything together

«
  { } TMENULST
  { } TMENUOTHR
  L1 TMENU 
»
  • The first two lines clean both menus and the third displays the top level menu on the active area. From now on all the execution happens between the menus;
  • If flag -11 is toggled the top level menu is displayed in a different area, but the application keeps working in the same way: the first two levels are displayed in one area, the third level is displayed in the other area and when the menus are closed the menu areas are redrawn correctly.
  • manual/chapter7/custmenu.txt
  • Last modified: 2022/01/18 07:29
  • by claudio