manual:chapter2:interface

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
manual:chapter2:interface [2019/11/20 15:05]
jojo1973
manual:chapter2:interface [2019/11/24 15:14] (current)
jojo1973
Line 4: Line 4:
  
 The **newRPL** display interface is similar to that of the stock HP 50g ROM in that the top ~65% of the display is the stack area (levels 1 through 7), followed by a row of soft menus. A new feature of **newRPL** is two separate sets of soft menus. The top set of soft menus (**Menu 1**) spans the width of the display.  The second set of soft menus (**Menu 2**) occupies two lines on the lower left of the screen.  The **newRPL** display interface is similar to that of the stock HP 50g ROM in that the top ~65% of the display is the stack area (levels 1 through 7), followed by a row of soft menus. A new feature of **newRPL** is two separate sets of soft menus. The top set of soft menus (**Menu 1**) spans the width of the display.  The second set of soft menus (**Menu 2**) occupies two lines on the lower left of the screen. 
- 
----- 
  
 ==== Angle Indicator ==== ==== Angle Indicator ====
  
 The angle indicator displays the current angle mode of the calculator.  In the figure, the calculator is in degree mode.  Other mods are radians, grads and degrees / minutes / seconds.  The angle mode can be changed using the commands ''[[manual:chapter6:flags:cmd_deg|DEG]]'' (to degrees), ''[[manual:chapter6:flags:cmd_grad|GRAD]]'' (to grads), ''[[manual:chapter6:flags:cmd_rad|RAD]]'' (to radians) and ''[[manual:chapter6:flags:cmd_dms|DMS]]'' (to degrees / minutes / seconds). The angle indicator displays the current angle mode of the calculator.  In the figure, the calculator is in degree mode.  Other mods are radians, grads and degrees / minutes / seconds.  The angle mode can be changed using the commands ''[[manual:chapter6:flags:cmd_deg|DEG]]'' (to degrees), ''[[manual:chapter6:flags:cmd_grad|GRAD]]'' (to grads), ''[[manual:chapter6:flags:cmd_rad|RAD]]'' (to radians) and ''[[manual:chapter6:flags:cmd_dms|DMS]]'' (to degrees / minutes / seconds).
- 
----- 
  
 ==== Complex Mode Indicator ==== ==== Complex Mode Indicator ====
  
 If complex mode is set (flag [[manual:appendix:flags#flag-103|-103]]), a ''C'' annunciator is shown in the display. If complex mode is set (flag [[manual:appendix:flags#flag-103|-103]]), a ''C'' annunciator is shown in the display.
- 
----- 
  
 ==== Flag Indicators ==== ==== Flag Indicators ====
Line 23: Line 17:
 The flag indicators show the first six user flags (out of 128 total possible).  They are arranged as flags 1 through 3 on the top row and 4 through 6 on the bottom row.  So, for example, setting flag 3 is accomplished by ''3 [[manual:chapter6:flags:cmd_sf|SF]]'', and clearing the flag by ''3 [[manual:chapter6:flags:cmd_cf|CF]]'' The figure shows flag indicators 1 and 5 set, but 2, 3, 4, and 6 cleared. The flag indicators show the first six user flags (out of 128 total possible).  They are arranged as flags 1 through 3 on the top row and 4 through 6 on the bottom row.  So, for example, setting flag 3 is accomplished by ''3 [[manual:chapter6:flags:cmd_sf|SF]]'', and clearing the flag by ''3 [[manual:chapter6:flags:cmd_cf|CF]]'' The figure shows flag indicators 1 and 5 set, but 2, 3, 4, and 6 cleared.
  
----- 
  
 ==== SD Card Indicator ==== ==== SD Card Indicator ====
Line 34: Line 27:
   * **inverse grey**: open files but all writes complete - safe to remove card after closing files.    * **inverse grey**: open files but all writes complete - safe to remove card after closing files. 
  
----- 
  
 ==== Autocompletion ==== ==== Autocompletion ====
  • manual/chapter2/interface.txt
  • Last modified: 2019/11/24 15:14
  • by jojo1973