Both sides previous revision
Previous revision
|
Next revision
Both sides next revision
|
manual:chapter1:installation [2019/03/26 09:34] claudio [What is needed] |
manual:chapter1:installation [2019/03/26 09:38] claudio |
====newRPL ROM installation Instructions==== | ====newRPL ROM installation Instructions==== |
| |
- The **update.scp** text file contains only the name of the ROM file, **newrplfw.bin**. Note that the text file must be a plain text file, so it cannot have embedded codes that frequently accompanies documents created with, for example, Microsoft Word. The text file can be created on a Mac using TextEdit, Windows using Notepad, or on linux using Vi (or any text editor of choice). Put both the **update.scp** and **newrplfw.bin** files in the root filesystem of the SD card. Insert the SD card into the calculator. | - For SD card installation only: The **update.scp** text file contains only the name of the ROM file, **newrplfw.bin**. Note that the text file must be a plain text file, so it cannot have embedded codes that frequently accompanies documents created with, for example, Microsoft Word. The text file can be created on a Mac using TextEdit, Windows using Notepad, or on linux using Vi (or any text editor of choice). Put both the **update.scp** and **newrplfw.bin** files in the root filesystem of the SD card. Insert the SD card into the calculator. |
| - For USB installation: just connect the cable and start the connectivity kit that came with the calculator. |
- Enter the **Boot/Self Test Mode**: Power the calculator OFF, press and hold the plus(+) and minus(-) keys simultaneously, insert a paper clip into the reset hole on the back of the calculator, remove the paper clip and then release the plus/minus keys after a few seconds. The screen will have two options when in this mode: 1. UPDATE CODE, and 2. SELFTEST (the Boot version and the serial number appear at the bottom of the screen). | - Enter the **Boot/Self Test Mode**: Power the calculator OFF, press and hold the plus(+) and minus(-) keys simultaneously, insert a paper clip into the reset hole on the back of the calculator, remove the paper clip and then release the plus/minus keys after a few seconds. The screen will have two options when in this mode: 1. UPDATE CODE, and 2. SELFTEST (the Boot version and the serial number appear at the bottom of the screen). |
- Enter mode 1. UPDATE CODE | - Enter mode 1. UPDATE CODE |
- Choose 2. CARD | - Choose 2. CARD if using an SD card, or 1. USB if using the connectivity kit (and start the transfer from the connectivity kit). |
| |
(//Figure shows screen shots of the installation as it proceeds//) | (//Figure shows screen shots of the installation as it proceeds//) |